Walker Boots

Pneumatic, CAM and ROM walker boots for foot and ankle recovery.

Factory-direct from Xiamen, China
OEM & ODM programmes available
Size ranges from XS to XL
Air, gel and foam constructions

A walking boot holds the foot and ankle still while an injury, a fracture or a surgical repair heals — and in many stable fractures it replaces a cast, so the limb stays protected but accessible. This range covers short 11-inch and tall 17-inch shells, inflatable air cushions and air-pump liners for compression and swelling control, fixed CAM shells for the simplest cast replacement, and an adjustable ROM boot for protocols that need controlled ankle movement in set increments. Sizes run from XS to XL, fitting either foot, with OEM colours and private-label programmes available. Request a quote for pricing, sizing or distributor packs.

Air Cam Walker Boot 11″ – Inflatable Aircell Support
An air cam walker boot with a steel-reinforced shell and inflatable aircells that add adjustable compression around the ankle. Circumferential straps close one-handed, underfoot cushioning absorbs part of each step, and the symmetrical 11-inch shell fits either foot. Sizes XS…
Air Walker Boot 17″ – Inflatable Aircell Support with Rocker Sole
An air walker boot with a 17-inch shell that holds the ankle and lower leg still after a fracture, sprain or operation. Inflatable aircells add adjustable compression around the joint, steel-reinforced uprights carry load up the leg, and a rocker…
Lightweight Air Walking Boot 17″ – Inflatable Support, S to L
A lightweight air walking boot built for warm-weather recovery: at 630 g in size S it is the lightest tall model in this range. A double airbag adds adjustable compression around the ankle and a breathable lining keeps the leg…
Medical Moon Boot 17″ – Dual Bladder Pneumatic Walker
A medical moon boot with a 17 inch full shell that holds the lower leg, ankle and foot through healing. Dual bladders are integrated into the base of the foot and pressurise under the sole as swelling changes, and the…
Pediatric Walking Boot – Kids’ Moldable-Shell Walker
A pediatric walking boot for children recovering from ankle sprains and stable fractures. Moldable metal stays let the shell follow a small leg, three stackable heel wedges raise the heel in steps as the ankle is allowed to move, and…
Pneumatic Walking Boot 11″ – Inflatable Air Cushion Walker
A pneumatic walking boot with an 11 inch short shell that covers the ankle and foot while keeping the calf free. The rigid reinforced frame runs on a rocker sole, the air-inflated liner is available as an option to control…
ROM Walker Boot 17″ – Adjustable Angle Walker
A ROM walker boot with dial-lock hinges that limit ankle movement instead of freezing it. Dorsiflexion can be set to 0°, 10°, 20°, 30° or 45° and plantarflexion to 0°, 10°, 20° or 30°, so the boot follows the protocol…
Short Air Walking Boot 11″ – Inflatable Aircell Support
A short air walking boot with an 11-inch shell that holds the ankle and foot while leaving the calf free. Inflatable aircells add adjustable compression against the joint, circumferential straps close over the shell, and a mesh-lined inner boot keeps…
Short Cam Walker Boot 11″ – Fixed CAM Shell
A short cam walker boot with a fixed 11 inch shell and no hinge: the reinforced frame holds the ankle in one position while the rocker sole carries the foot through each step. Two straps with metal buckles adapt to…
Short Walking Boot 11″ – Power Walker with Air Cushion
A short walking boot with an 11 inch low-profile shell that covers the ankle and foot while leaving the calf free. Inflatable air cells inside the shell hold the ankle evenly and help control swelling, and the rocker sole rolls…
Tall Air Walking Boot 17″ – Inflatable Aircell Support
A tall air walking boot with a 17-inch shell that supports the ankle and the lower leg above the joint. Side aircells add adjustable compression, a rocking toe and heel with an anti-flex sole rolls each step forward, and circumferential…
Tall Walking Boot 17″ – Power Walker with Foam Liner
A tall walking boot with a 17 inch shell that supports the ankle and the lower leg above the joint. The air cushion is built into the base so it absorbs load under the foot through each step, and a…

01OEM & Custom Solutions

Agile manufacturing support, built around your practical needs.

Custom sizes
Custom colours
Private label
Custom packaging
Printing & marking
Mixed model cartons
Live Production Photos

01Direct Contact
02Sizing & Specs Confirm
03Quotation
04Sample
05Production
06Workshop Inspection

02Quality & Documentation

Every brace and support we list is manufactured in Xiamen, China, and shipped with complete packing data for your container planning. As a factory-direct supplier, we execute your production runs strictly against the approved sample specs. What you approve is what you receive, order after order.

10Orthopaedic product lines
100+Models in the range
XS – XLSize coverage across the range
OEM / ODMProgrammes for distributors and private label

03Why Choose Us

Reliable factory supply. Honest material quality.

Agile Sizing & Fit Support
Send us your target sizing charts or physical samples. We will verify the sleeve elasticity and strap adjustments on the workshop floor within days.
Transparent Material Specs
Material and construction details are supplied with the quotation so you can verify before ordering.
Stable supply
One specification sheet used for the sample, the production run, and every repeat order.
Export packing
One specification sheet used for the sample, the production run, and every repeat order.

04FAQ

Can you produce this range under our own brand?

Yes. Our OEM and ODM programme covers private label, custom colours, custom sizes and custom packaging. The final specification, minimum order quantity and lead time are confirmed with your quotation.

How do I choose the right size?

Sizing is measured rather than guessed. Each product page lists the size range and the measurements for the model, and we confirm the size from the measurements you send — foot length, calf, ankle, knee or arm circumference, depending on the product.

Do you supply clinics, distributors and tender projects?

Yes. We supply clinics, distributors and tender projects, and we can quote against a specification, a size mix or a tender schedule. Pricing, packing and documents are confirmed with your quotation.

What should I send with an enquiry?

The model or model number if you have it, the joint or the injury stage, the quantity, the size mix, and any branding or packaging requirement. If you only have a photo or a sample reference, that is enough for us to start.

Can I request a sample before ordering?

Yes — sample requests are reviewed with your enquiry. Sample cost, shipping and availability are confirmed with your quotation.

How is the product packed for export?

Carton dimensions, pieces per carton and gross and net weight are documented for the models you select, and confirmed with your quotation so you can plan your container and customs paperwork.